堡壘系列     FT03



■ 迷你的截面積與機殼周圍無線材

■ 主機板旋轉90度的煙囪式散熱機構

■ 支援任何長度顯示卡

■ 支援高塔型CPU散熱器

■ 強迫式背位理線設計

■ 熱插拔硬碟機構,符合便捷的資料儲存需求

■ 硬碟架於背面,被動散熱超靜音

         作為堡壘系列的第3台機殼,銀欣科技一直在思考未來機殼的雛形。FT03一開始的設計方向,就是要將機殼深度縮減至極限,同時能安裝目前的高階主流配備。傳統的高效能機殼不僅體積龐大,更無法緊貼靠牆導致佔用許多空間,FT03將機殼機構帶領到一個新的層次,最大厚度達2.5mm的全鋁噴砂外殼,沒有任何線材破壞其簡潔、完整的美感;搭配FT03迷你的截面積,大幅增加空間利用率。

機殼內部採用銀欣引以為傲的煙囪式散熱架構,透過將micro-ATX主機板旋轉90度達成自然界中最具效率的熱對流散熱。此外,FT03將如此玲瓏的體積作了最大運用,最大可相容13.7吋擴充卡插槽、支援3顆3.5吋與1顆2.5吋硬碟槽、其中1組3.5吋硬碟具備熱插拔機構,完美詮釋FT03所帶來的強效與彈性。

FT03以其獨特比例及可安置於角落位置的特性,桌面空間不再捉襟見肘。作為堡壘系列的最新機種,FT03將成為最受注目的中型機殼。






型號 SST-FT03B (黑)
SST-FT03S (銀)
SST-FT03T (鈦)
--
材質 鋁外罩, 鐵機身
主機板 Micro-ATX, Mini-DTX, Mini-ITX
磁碟架 外露 吸入式薄型光碟機 x 1
--
隱藏 3.5" x 3 * , 2.5" x1
冷卻系統 前方 --
背部 --
側方 --
上方 1 x 120mm 出風風扇, 1200rpm, 22dBA
1x 92/80mm Option
底部 2X120mm進氣風扇 1200rpm 22dBA
後方風扇向下相容至80mm x 2
隱藏 --
水冷排支持 前方 N/A
背部 N/A
上方 120mm x 1
底部 N/A
擴充槽 4
前置 I/O USB 3.0 x 2 (向下相容於USB 2.0)
audio x 1
MIC x 1
電源 標準 PS2(ATX)
顯示卡 可相容於13.77" (349mm) 長擴充卡, 寬度6.77" (171mm)
處理器散熱器限高 167mm
電源供應器深度限制 選配 最長180mm
淨重 6.7kg
尺寸 235mm(W) x 487mm(H) x 284mm(D), 32.5 公升


CLEARCMOS
Get a SST-CLEARCMOS add-on to conveniently clear CMOS without opening the case. 更多...
PP05-E
短版超柔軟排線電源線材 更多...
FN121-BL
Equip your FT03 with FN121-BL for added lighting effect in available 120mm fan slots. 更多...
FN81
Add FN81 for additional cooling in available 80mm fan slots 更多...
FQ81
80mm ultra-quiet PWM fan 更多...
ST75F-PT
世上最小80PLUS白金牌全模組ATX電源供應器 更多...
 
 
描述
版本
大小
下載
FT03 Manual
 v2.0 
6,076 KB
     
FT03 高解析度照片
  
16,752 KB
     


FT03 eDM (TW-FT03-EDM.pdf)
 
461 KB

A:According to tests we’ve done internally, a CPU with TDP rating of 130W (such as Intel Core i7), can run with a fanless tower-style heatsink inside the FT03. However, this does not account for overclocking and performance will vary depending on the efficiency of the heatsink used. We suggest that you try at your own risk.

A:When the hard drives are installed, they are so close to the aluminum side panel that passive heat conduction does occur to help reduce drive temperature. For the hard drive installed in the hot-swappable bay, an aluminum block pre-attached to the side panel will also help to provide heat conduction for cooling duty.

A:The FT03 was designed to have the smallest footprint possible and to be aesthetically pleasing so a slim optical drive with slot loading is the best choice to achieve this objective.

A:Yes, the exhaust from the power supply will have a small effect on overall case temperature. This is unavoidable due to FT03’s small footprint design. However, our internal testing has shown that if a high efficiency power supply is used (such as SilverStone’s 80 PLUS Silver certified Strider Plus series), the exhaust temperature will likely stay below 35 degrees Celsius and have minimum effect on overall case cooling performance.

A:One of FT03’s design parameters was to eliminate all cable connections on all four sides of the case. As most power cords are connected closer to the floor and usually below case height, we moved the power cord connector to the bottom of the case for more elegant integration.

A:Extensive testing was conducted during FT03’s development to determine the optimal height of the case stand for air intake so there is no benefit to increase the height any further. The bottom of FT03 has an integrated fan filter that can effectively cut down dust intake into the case so as long as the filter is cleaned on a regular basis, there is no need to worry about dust or cooling performance.

A:Yes you can, FT03’s rear and right panel have no ventilation holes or other uses so we actually recommend users to place their FT03 into a corner to further take advantage of its incredibly short footprint.

A:導熱管有兩種型式:溝槽與粉末導熱管,即使是比較高級的粉末導熱管會會受到地心引力的影響,多少會影響到效能;一般而言導熱管水平方向貨是由下往上都沒有問題。但是由上往下效能便會折損。所以我們建議在選配或安裝Cooler時需要先考慮方向性。Example:

主機板:

玩家級主機板在一般機殼的方向


玩家級主機板在FT03機殼的方向如上兩圖例:絕大部份的主機板導熱管方向在一般機殼與FT03均是由下往上傳遞,基本上沒有受到影響。
CPU cooler:
水平式cooler


好的方向 好的方向 不好的方向


通常Cooler在安裝時就可以選擇方向性,以NT06-E為例,以上是三種方向性。

VGA cooler


散熱器在FT03上面會因為導熱管方向問題而效能折損的狀況並不多,以上是圖例。

A:Most users can install it in the 120mm fan slot above the CPU area.