APシリーズ     AP181

■ 業界をリードするエアチャンネルファン

■ 空気抵抗を減らす幅広ブレード

■ ファンガードの倍の内蔵エアチャンネルグリルでコンパクトサイズ

■ 低消費電力


*Air Penetrator design explained
*Air Penetrator fan demonstration video:

型番 SST-AP181
カラー Black
ベアリング形式 Sleeve
コネクタ 3pin
定格電圧 12V DC
始動電圧 10.8V DC (in low rpm mode)
定格電流 0.45A
定格電力 5.4W
回転数 600 ; 900 ; 1200 rpm
流量 65 / 100 / 130 CFM
有効エアフロー範囲 1.2 ; 3 Meter
静圧 Max 0.9 / 1.6 / 2.45 mmH2O
エア スピード 1.5m/s ; 2.4m/s ; 3.1m/s (measured at fan exit)
ノイズレベル 17 / 25 / 34 dB(A)
製品寿命 16,000 時間
寸法 180mm (L) x 180mm (W) x 32mm (H)
重量 441.35g

Enthusiasts tower chassis その他...
Extreme enthusiast extended ATX tower chassis. その他...
AP181 High resolution photos
1,041 KB

A:AP181 uses industry standard 3pin fan connector, so it will work with most fan controllers, motherboards, and other devices that use voltage regulation to control fan speed.

The starting voltage for AP181 at low speed setting requires about 10.8V, which some fan controllers may not support properly. So when connecting to fan controller, it is best to flip the case’s fan speed switch to high setting to enable lower starting voltage. At 5V for example, the fan speed will be at around 500rpm, which is nearly inaudible.

When connecting to motherboard for fan speed control, if AP181 appears to have trouble starting, it may be due to motherboard detecting low temperature and supply too little voltage. To solve this problem, please change the motherboard fan speed or temperature setting from within the motherboard BIOS or flip the case’s fan speed switch to high setting.